SX120 Spare Parts

Maintenance

Maintenance Specifications

Oil:

500ml (or until the gearbox is half full) of 80w-90 gear oil, drain and refill once a year.

Grease:

General Purpose grease, grease points every month, or if the spreader is not being used, once a year.

Tyres:

Inflate to 24 psi and check regularly. Reinflate as necessary.

Exploded Parts Diagram

SX120 Parts Breakdown 2

Table of Parts

For a larger image, click on the picture

No.	Photo	Code	Description	Notes
1		1093	D Pin	Used for both agitator and drive flange (specify which it is to be used for at time of order)
2		1094	Shutter Lever Spring	Grease contact surfaces (both ends)
3		1644	Grip Handle 22mm 7/8 PVC Black	Heat in boiling water for easier install
4		1651	Tri Knob Female 8mm
5		1800	Hopper and Lid Yellow	Hoppers and lids also available separately
6		1944	Shutter Plate
7		2186	Wheel (bearing)	Attaches to stub axle on frame
7.1		1572	Wheel / Gearbox Bearing	Standard 6205 bearing
7.2		1876	Wheel Bearing Seal
8		2187	Wheel (keyed)	Attached to end of drive axle, will likely also need item SP100-034
9		5042S/S	Circlip 45mm external S/S
10		SP100-003	Agitator Bush	Recommend also purchasing item 5042S/S
11		SP100-007	Drive Axle (New Model)	Consider also item SP100-016
12		SP100-008	Agitator	Consider also item SP100-003
13		SP100-011	Towbar Adjuster
14		SP100-012	Shutter Lever
15		SP100-016	Drive Stub	Bolt - M8x50 ZP & Nyloc Nut Grease Nipple - p/n 5054A
16		SP100-017	Pointer
17		SP100-034	Drive Axle Key
18		SP121-006	Drive Slider Female
19		SP102-003	Spinner Disc Complete Assembly	3 x M8x16 SS Bolts
19.1		SP102-005	Spinner Fin
22		SP100-037	Hopper Side Arm LH
23		SP100-037a	Hopper Side Arm RH
24		3010	Decal 120
25		1744	Decal 0-7 Shutter Numbers
26		2715	Serial Number Plate
27		2120	Gearbox Complete Assembly	Click here for Parts Breakdown
27.1		1572	Wheel / Gearbox Bearing	Standard 6205 bearing
27.2		1868	Gearbox Seal
28		1679	Felt Washer	Oil soak before install
29		1901	S/S Shaft Guard
30		RATA30	Vogal Warranty Sticker
31		M SX120	SX120 User Manual
32		1846	UCP206 30mm Bearing & Housing Set	M12 x 40 Bolts