Subsoil aerators
Access mole plough spare parts
Not sure which one you have? The model name is on the serial plate.
Parts list
| No. | Photo | Part number | Description | Notes | Qty | Add to enquiry |
|---|---|---|---|---|---|---|
| 1 | 460014 | Moleplough Headstock Pivot | Headstock universal joint centre section, P25-155 to Headstock and P25-110 to Mainframe | |||
| 2 | 460159 | Mole Plough Revolving Plug Pin | Joins 460128 to 460102-A and is attached to 460153 using 460118 | |||
| 3 |
|
460102-A | HYAS Access Blade | c/w 460153, 460142, 440104 & 460109 - *If your Mole Plough is serial No. 25MP901 and onward you will need Part numbers 440181 & 440182 & 440102 (instead of 460153 & 460142) | ||
| 3.1 | 460153 | Mole Plough Torpedo | Welds to bottom of 460109 Part # that includes torpedo and point is 460143 | |||
| 3.2 | 460142 | Torpedo Tip Casting | Welds to front of 460153 | |||
| 3.3 |
|
440104 | NiHard Shin Strip | Welds to front of 460109, x2.3 per blade | ||
| 3.4 | 460109 | Access Mole Blade PROFILE New Aug 2018 | Blade profile only - for complete blade see 460102-A | |||
| 4 |
|
460128 | Revolving Plug 3" | Attaches to 460102-A using 460159, 4953, and 460118 | ||
| 5 |
|
460118 | Plug Rivet - Rata | Attaches 460159 to 460153 | ||
| 6 | 4953 | 3/4 Nut Nyloc UNC Zinc | Locks onto standard nut on 460159 to hold 460128 | |||
| 7 | 460114 | Blade Bush (Hard) | Goes between 460102-A and 4764 – inside frame | |||
| 8 |
|
460120 | HYAS Access Top Link Bar | Attached using 4764 x2 and 4753 x2 | ||
| 8.1 | 4764 | M20x75 Bolt Zinc | Attaches 460120 | |||
| 8.2 | 4753 | M20 Nut Nyloc Zinc | Attaches 460120 | |||
| 9 |
|
460006 | HYAS Thread Adjuster | Threads into 460007 and is attached with P25-95 | ||
| 10 | 460007 | HYAS Access Blade Adjuster | 460006 threads in and attached to blade with 4473 and 4453 | |||
| 10.1 | 4473 | M12x50 Bolt Zinc | Attaches 460007 to 460102-A | |||
| 10.2 | 4453 | M12 Nut Nyloc Zinc | Attaches 460007 to 460102-A | |||
| 11 | 460163 | Ram Hyd Access Mole Plough | Attached using P25-95 | |||
| 12 | 460011 | HYAS Access Linkage Plate Assembly | Attached to Mainframe, 460163 and 460006 using P25-95 | |||
| 13 | 201.046 | D Shackles Galv 12mm | Attaches 201.329 to Mainframe and Headstock | |||
| 14 | 201.329 | Chain 8mm PC Galv Long Link | Attached using 201.046 | |||
| 15 | 5132 | Grease Nipple | ||||
| 16 |
|
P25-95 | Machine Pins (P25-95) Machine Pins | 4361 holds head | 4x required | |
| 17 | P25-110 | Machine Pins (P25-110) Machine Pins | 4365 holds head | 1x required | ||
| 18 |
|
P25-155 | Machine Pins (P25-155) Machine Pins | 4361 holds head | 1x required | |
| 19 |
|
1092 | Lynch Pin | For S8861 | ||
| 20 |
|
S8861 | Lower Link Pins Cat 2 | |||
| 21 | 800017 | 35mm Standard Ducting | Goes over chain | |||
| 22 | 4361 | M10x30 Bolt Zinc | For Pins | |||
| 23 | 4396 | M10 Washer (21x1) Zinc | For Pins | |||
| 24 | 4353 | M10 Nut Nyloc Zinc | For Pins | |||
| 25 | 4365 | M10x35 Bolt Zinc | For P25-110 | |||
| 26 | 460114 | Blade Bush (Hard) |
Send a parts enquiry
This isn't an order — we'll be in touch to confirm the parts, price and freight before anything is invoiced. Add your serial number if you have it.
Parts in this enquiry
No parts added yet. Use Add in the list above, or list the parts you need in Comments below.
If this doesn't look like your model
Try the next model in the range, or give us a call to identify the machine.
-
Field Wave spare parts
View parts -
Single leg ripper spare parts
View parts -
Subsoiler spare parts
View parts -
Can't see your product?
Send Latin a photo or serial number, and she will help you identify it.
Our team can identify it from a photo or serial number.
