Subsoil aerators
Field Wave spare parts
Parts list
Breakdown
| No. | Photo | Part number | Description | Notes | Add to enquiry |
|---|---|---|---|---|---|
| 1 | 403305 | 5 Leg Roller | Specify Shear Bolt or Auto Reset | ||
| 2 | 403302 | 5 Leg Scraper | Uses Roll Pin (5139) and Washer (4976) to attach | ||
| 3 | 403303 | Scraper Mount left | Attaches with x2 M12x150 bolts & nyloc nuts | ||
| 4 | 403304 | Scraper Mount right | Attaches with x2 M12x150 bolts & nyloc nuts | ||
| 5 | 403301 | Roller Arm | |||
| 6 | UCP208-24 | 108-D1 Bearing & Housing 108-D1 Bearing & Housing | Attaches with x2 M12x150 bolts & nyloc nuts | ||
| 7 |
|
S8861 | Lower Link Pins Cat 2 | ||
| 8 |
|
1092 | Lynch Pin | ||
| 9 | 403306 | Roller Arm Pin | Attaches with x1 M8x75 bolt and nyloc nut | ||
| 10 | 440175 | Panerazer Leg c/w NiHard & foot support Panerazer Leg c/w NiHard & foot support | Shear Bolt (7088): 9/16 x 2 1/2" bolt & nut. Grade: 8.8 & Pivot Bolt (4961): 3/4 x 3" bolt & nyloc nut & NiHard (440104): x1.5 required per leg | ||
| 11 | B312 | Turnbuckle 400mm | Attaches to the main frame with with x1 3/4 x 4" bolt & nyloc nut (4971), and to the roller arm with x1 3/4 x 3" bolt & nyloc nut (4933) | ||
| 12 | 4976 | 1" Heavy Flat Washer | |||
| 13 | 5139 | Roll Pin 6x40 | |||
| 14 | 440125 | Pasture Foot | Bolts to leg with x2 M12x45 bolts & nyloc nuts (4471) | ||
| 15 | 440127 | Point Lock | Rubber | ||
| 16 | 440128 | Point Pin | Steel | ||
| 17 | 440132 | Standard Pasture Point c/w Cutting Edge | |||
| 17.1 | 440134 | Pasture Point c/w 150mm Wide Cutting Edge | Not pictured | ||
| 18 | OSA | Skieth Assembly | See below for parts breakdown See breakdown | ||
| 19 | ARK | Auto reset kit Converts a shear bolt Field Wave to auto reset | Not pictured. See below for parts breakdown See breakdown |
Sub-assembly
Field Wave OSA skieth assembly parts
| No. | Part number | Description | Notes | Add to enquiry |
|---|---|---|---|---|
| 1 | 103301 | Coulter Stalk | Attaches to the main frame with x2 M16x35 set screws | |
| 2 | 410705 | Coulter Arm c/w hub | See below for parts breakdown See breakdown | |
| 3 | 104280 | 18" Plain Coulter Blade | Bolts to 410705 with x2 M10x30 bolts and x2 M10x35 bolts & nyloc nuts | |
| 4 | 5134 | Split Pin 8x80 Zinc | ||
| 5 | 104412 | Hub Cap Retainer | Bolts on with x2 M10x35 bolts and nyloc nuts |
Sub-assembly
Field Wave 410705 coulter arm parts
| No. | Photo | Part number | Description | Add to enquiry |
|---|---|---|---|---|
| 1 | 410705a | Bare Coulter Arm Fieldwave single arm coulter (not including hub and bearings) | ||
| 2 | 104414 | Bearing Seal HD | ||
| 3 | 104407 | Taper Bearing - Inner (Larger) | ||
| 4 | 400735 | Coulter Hub | ||
| 5 | 104408 | Taper Bearing - Outer (Smaller) | ||
| 6 | 7554 | M20 Half Nut | ||
| 7 | 7553 | M20 Half Nut Nyloc | ||
| 8 |
|
104410 | Hub Cap (104410) Hub Cap | |
| 9 | 5054A | Grease Nipple 1/4 UNF Straight |
Sub-assembly
Field Wave auto reset parts
| No. | Part number | Description | Add to enquiry |
|---|---|---|---|
| 1 | 400413 | Auto reset spring pin | |
| 2 | 440140 | Front spring anchor | |
| 3 | 440138 | Rear spring anchor | |
| 4 | 400411 | Auto Reset Spring 5 Leaf | |
| 5 | 405315 | Set Screw Adjusting Block | |
| 6 | 4961 | 3/4 x 3 UNC ZP Bolt | |
| 7 | 7088 | 9/16" x 2 1/2" UNF Bolt ZP | |
| 8 | 403290 | Autoreset set screw 1" UNF 14 TPI | |
| 9 | 4896 | 1" 14 TPI Nut Zinc |
Send a parts enquiry
This isn't an order — we'll be in touch to confirm the parts, price and freight before anything is invoiced. Add your serial number if you have it.
Parts in this enquiry
No parts added yet. Use Add in the list above, or list the parts you need in Comments below.
If this doesn't look like your model
Try the next model in the range, or give us a call to identify the machine.
-
Single leg ripper spare parts
View parts -
Subsoiler spare parts
View parts -
Access mole plough spare parts
View parts -
Can't see your product?
Send Latin a photo or serial number, and she will help you identify it.
Our team can identify it from a photo or serial number.
